Hp Workstation xw8000 User Manual download pdf (Page 60)

3-28

Adaptec SCSI RAID 2120S/2200S Software User’s Guide

It is only possible to create tasks for arrays or drives. If you select

Tas ks for a channel, controller, or the system, all relevant tasks will

be displayed.

When Adaptec Storage Manager is installed a scheduled task is

created to perform a weekly background consistency check of all

hot spares in the system. This task can be seen by clicking Tas ks

when it is blue, that is when nothing is selected.

New Tasks Tab

Allows you to create new tasks for an array or a drive. New Tasks

can either be run immediately, or scheduled to run at a later time.

Available tasks are Verify, Verify with Fix, and Clear. An

explanation of the impact of each task is given below.

■ Drive

■ Veri fy —Performs a test of the entire drive to ensure that

there are no problems. Any bad blocks found are not

repaired.

■ Verify with Fix—Performs a test of the entire drive to

ensure that there are no problems. Any bad blocks found are

repaired.

■ Clear—Erases all data on the drive. Any data previously on

the drive is not recoverable, and if all or part of the drive is

used in an array, data integrity of the array will be

compromised.

■ Array

■ Veri fy —Performs a test of the entire array to ensure that

data is consistent. Any inconsistency found is not repaired.

■ Verify with Fix—Performs a test of the entire array to

ensure that data is consistent. Any inconsistency found is

repaired.

■ Clear—Erases all data on the array. Any data previously on

the array is not recoverable.

UG.book Page 28 Saturday, October 26, 2002 12:08 PM

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 127 128

No comments

Hp Workstation xw8000 User Manual Page 60