Hp Workstation xw8000 User Manual download pdf (Page 26)

2-10

Adaptec SCSI RAID 2120S/2200S Software User’s Guide

Using the SCSISelect Utility

The SCSISelect Utility enables you to change device and controller

settings without opening the system chassis or handling the card. If

you want to view or change the current settings, see Starting and

Exiting SCSISelect on page 2-10. For detailed descriptions of each

setting, see Using the Controller Configuration Utility on page 2-11.

Starting and Exiting SCSISelect

To start SCSISelect:

1 When you turn on or reboot your system, press Ctrl+A to access

the Adaptec RAID Configuration (ARC) utilities when

prompted by the following message:

Press <Ctrl><A> for Adaptec RAID Configuration Utility

2 If multiple controllers are installed, select the controller you

want to configure and press Enter.

3 From the ARC menu, select SCSISelect Utility.

The Controller Configuration and SCSI Configuration menu

options are displayed.

To exit SCSISelect, press Esc until a message prompts you to exit. (If

you changed any host adapter settings, you are prompted to save

the changes before you exit.) Select Yes to exit and reboot the

system. Any changes you made take effect after the system boots.

Using the SCSISelect Menus

To select a SCSISelect menu option, move the cursor to the option

with the Up/Down arrow keys and press Enter. In some cases,

selecting an option displays another menu. You can return to the

previous menu at any time by pressing Esc.

To restore the original SCSISelect default values, press F6 from the

Configure/View Host Adapter Settings screen.

UG.book Page 10 Saturday, October 26, 2002 12:08 PM

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 127 128

No comments

Hp Workstation xw8000 User Manual Page 26