English 43
3 Replacing Hardware Components
Replacing the Floppy Drive
In the Minitower
1 Remove the computer’s cover and front panel (described in this
chapter).
2 Remove the drive’s connectors.
3 Press the two latches inward
➊ and slide out the floppy drive ➋.
4 Place the drive upside down, remove the two side screws, and lift out
the drive.
5 Insert the new floppy drive (pin side first) then replace the two side
screws.
➊
➊
➋
gap.bk : gap-3.fb4 Page 43 Friday, January 15, 1999 5:03 PM
Comments to this Manuals