Hp ProLiant DL380 G6 Server User Manual Page 31
- Page / 117
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Setup 31
Because of the high ground-leakage currents associated with multiple servers connected to the same power
source, HP recommends the use of a PDU that is either permanently wired to the building’s branch circuit or
includes a nondetachable cord that is wired to an industrial-style plug. NEMA locking-style plugs or those
complying with IEC 60309 are considered suitable for this purpose. Using common power outlet strips for
the server is not recommended.
Rack warnings
WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that:
• The leveling jacks are extended to the floor.
• The full weight of the rack rests on the leveling jacks.
• The stabilizing feet are attached to the rack if it is a single-rack installation.
• The racks are coupled together in multiple-rack installations.
• Only one component is extended at a time. A rack may become unstable if more than one
component is extended for any reason.
WARNING: To reduce the risk of personal injury or equipment damage when unloading a rack:
• At least two people are needed to safely unload the rack from the pallet. An empty 42U rack
can weigh as much as 115 kg (253 lb), can stand more than 2.1 m (7 ft) tall, and may become
unstable when being moved on its casters.
• Never stand in front of the rack when it is rolling down the ramp from the pallet. Always handle
the rack from both sides.
Identifying the contents of the server shipping carton
Unpack the server shipping carton and locate the materials and documentation necessary for installing the
server. All the rack mounting hardware necessary for installing the server into the rack is included with the
rack or the server.
The contents of the server shipping carton include:
• Server
• Power cord
• Hardware documentation, Documentation CD, and software products
• Rack-mounting hardware
In addition to the supplied items, you may need:
• Operating system or application software
• Hardware options
Installing hardware options
Install any hardware options before initializing the server. For options installation information, refer to the
option documentation. For server-specific information, refer to "Hardware options installation (on page 35)."
Installing the server into the rack
- HP ProLiant DL380 G6 Server 1
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Contents 6 6
- Component identification 7
- Front panel LEDs and buttons 8
- Systems Insight Display LEDs 9
- Rear panel components 11
- Rear panel LEDs and buttons 12
- System board components 13
- System maintenance switch 14
- NMI functionality 15
- SAS and SATA device numbers 16
- SAS and SATA hard drive LEDs 17
- PCI riser cage LEDs 18
- Battery pack LEDs 19
- Hot-plug fans 20
- Operations 22
- Remove the access panel 23
- Install the access panel 24
- Remove the PCI riser cage 26
- Install the PCI riser cage 26
- Remove the air baffle 27
- Rack planning resources 28
- Optimum environment 29
- Temperature requirements 30
- Power requirements 30
- Rack warnings 31
- Installing hardware options 31
- Setup 33 33
- Registering the server 34
- Introduction 35
- Processor option 35
- Install the heatsink 40
- Memory options 41
- DIMM identification 43
- Memory configurations 43
- Installing a DIMM 48
- Optical drive option 50
- Expansion board options 53
- PCI riser board option 56
- Hard drive cage option 57
- Cabling 63
- BBWC battery cabling 64
- Configuration and utilities 65
- HP ROM-Based Setup Utility 66
- Boot options 67
- BIOS Serial Console 67
- Configuring mirrored memory 67
- Array Configuration Utility 68
- Management tools 69
- ROMPaq utility 70
- Erase Utility 70
- Redundant ROM support 71
- Internal SD support 71
- Diagnostic tools 72
- Keeping the system current 73
- ProLiant Support Packs 74
- Care Pack 74
- Troubleshooting 75
- Symbols on equipment 76
- Warnings and cautions 76
- Symptom information 77
- Loose connections 79
- Service notifications 80
- Server health LEDs 80
- Troubleshooting flowcharts 80
- General diagnosis flowchart 81
- Symptoms: 83
- Troubleshooting 85 85
- POST problems flowchart 86
- OS boot problems flowchart 88
- Troubleshooting 89 89
- • Redundancy failure 90
- (http://www.hp.com/support) 91
- Troubleshooting 92 92
- Battery replacement 93
- FCC rating label 94
- Class A equipment 94
- Class B equipment 94
- Modifications 95
- • EMC Directive 2004/108/EC 96
- BSMI notice 97
- Korean notice 97
- Japanese notice 97
- Chinese notice 98
- Laser compliance 98
- Battery replacement notice 98
- Electrostatic discharge 100
- Specifications 101
- Technical support 104
- Technical support 105 105
- Customer Self Repair 106
- Technical support 107 107
- Reparo feito pelo cliente 108
- Technical support 109 109
- Technical support 110 110
- Technical support 111 111
- Acronyms and abbreviations 112
- Index 115 115
- Index 116 116
- Index 117 117
Related products and manuals for Computer hardware Hp ProLiant DL380 G6 Server
(87 pages)© 2020, manymanuals.com. All rights reserved. | 1.348 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals