Hp ProLiant DL380 G5 Server User Manual Page 64
- Page / 114
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Configuration and utilities 64
intervention. During this process, the ORCA utility, in most cases, automatically configures the array to a
default setting based on the number of drives connected to the server.
NOTE: The server may not support all the following examples.
NOTE: If the boot drive is not empty or has been written to in the past, ORCA does not
automatically configure the array. You must run ORCA to configure the array settings.
Drives installed Drives used RAID level
1 1 RAID 0
2 2 RAID 1
3, 4, 5, or 6 3, 4, 5, or 6 RAID 5
More than 6 0 None
To change any ORCA default settings and override the auto-configuration process, press the F8 key when
prompted.
By default, the auto-configuration process configures the system for the English language. To change any
default settings in the auto-configuration process (such as the settings for language, operating system, and
primary boot controller), execute RBSU by pressing the F9 key when prompted. After the settings are
selected, exit RBSU and allow the server to reboot automatically.
For more information on RBSU, see the HP ROM-Based Setup Utility User Guide on the Documentation CD
or the HP website (http://www.hp.com/support/smartstart/documentation
).
Boot options
Near the end of the boot process, the boot options screen is displayed. This screen is visible for several
seconds before the system attempts to boot from a diskette, CD, or hard drive. During this time, you can
do the following:
• Access RBSU by pressing the F9 key
• Access the System Maintenance Menu (which enables you to launch ROM-based Diagnostics or
Inspect) by pressing the F10 key
• Force a PXE Network boot by pressing the F12 key
BIOS Serial Console
BIOS Serial Console allows you to configure the serial port to view POST error messages and run RBSU
remotely through a serial connection to the server COM port. The server that you are remotely configuring
does not require a keyboard and mouse.
For more information about BIOS Serial Console, see the BIOS Serial Console User Guide on the
Documentation CD or the HP website (http://www.hp.com/support/smartstart/documentation
).
Configuring online spare memory
To configure online spare memory:
1. Install the required FBDIMMs.
- User Guide 1
- Audience assumptions 2
- Contents 3
- Contents 4 4
- Contents 5 5
- Contents 6 6
- Component identification 7
- Front panel LEDs and buttons 8
- Systems Insight Display LEDs 9
- Rear panel components 10
- Rear panel LEDs and buttons 11
- System board 12
- Item Description 13
- System maintenance switch 14
- NMI functionality 14
- FBDIMM slots 15
- SAS device numbers 16
- SAS and SATA hard drive LEDs 17
- PCI riser cage LED 18
- Battery pack LEDs 19
- Fan board components 21
- Item Description 22
- Operations 23
- Remove the access panel 24
- Install the access panel 25
- Remove the PCI riser cage 25
- Install the PCI riser cage 26
- Hot-plug fan operation 28
- Rack planning resources 29
- Optimum environment 30
- Temperature requirements 31
- Power requirements 31
- Rack warnings 32
- Installing hardware options 33
- Setup 35 35
- Registering the server 36
- Introduction 37
- Processor option 37
- Install the heatsink 42
- 16. Close the latches 43
- Memory options 44
- Installing FBDIMMs 47
- Media drive option 49
- DC power supply option 51
- Expansion board options 53
- PCI riser board option 56
- Cabling 58
- Fan board cabling 59
- Media drive bay cabling 60
- Battery cabling for BBWC 60
- Cabling 61 61
- Configuration and utilities 62
- HP ROM-Based Setup Utility 63
- Boot options 64
- BIOS Serial Console 64
- Array Configuration Utility 65
- Management tools 67
- HP Systems Insight Manager 68
- Management Agents 68
- Redundant ROM support 68
- Diagnostic tools 69
- Integrated Management Log 70
- Array Diagnostic Utility 70
- Keeping the system current 71
- ProLiant Support Packs 72
- Care Pack 72
- Troubleshooting 73
- Symbols on equipment 74
- Warnings and cautions 74
- Symptom information 75
- Loose connections 76
- Service notifications 77
- Troubleshooting flowcharts 77
- General diagnosis flowchart 78
- Symptoms: 80
- Troubleshooting 82 82
- POST problems flowchart 83
- OS boot problems flowchart 84
- • Redundancy failure 87
- Troubleshooting 88 88
- System battery 89
- FCC rating label 90
- Class A equipment 90
- Class B equipment 90
- Modifications 91
- • EMC Directive 2004/108/EC 92
- BSMI notice 93
- Japanese notice 93
- Korean notice 94
- Laser compliance 94
- Battery replacement notice 94
- Electrostatic discharge 96
- Specifications 97
- Technical support 99
- Technical support 100 100
- Customer Self Repair 101
- Technical support 102 102
- Reparo feito pelo cliente 103
- Technical support 104 104
- Technical support 105 105
- Technical support 106 106
- Acronyms and abbreviations 107
- Index 111 111
- Index 112 112
- Index 113 113
- Index 114 114
Related products and manuals for Computer hardware Hp ProLiant DL380 G5 Server
(135 pages)© 2020, manymanuals.com. All rights reserved. | 0.658 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals