Hp ProLiant BL280c G6 Server-Blade User Manual Page 58
- Page / 108
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Software and configuration utilities 58
SmartStart assists the deployment process by performing a wide range of configuration activities, including:
• Preparing the system for installing "off-the-shelf" versions of leading operating system software
• Installing optimized server drivers, management agents, and utilities automatically with every assisted
installation
• Testing server hardware using the Insight Diagnostics Utility ("HP Insight Diagnostics" on page 64)
• Installing software drivers directly from the CD. With systems that have Internet connection, the
SmartStart Autorun Menu provides access to a complete list of ProLiant system software.
• Enabling access to the Array Configuration Utility (on page 60) and Erase Utility (on page 63)
SmartStart is included in the HP Insight Foundation suite for ProLiant. For more information about SmartStart
software, see the HP Insight Foundation suite for ProLiant or the HP website
(http://www.hp.com/go/foundation).
HP ROM-Based Setup Utility
RBSU is a configuration utility embedded in ProLiant servers that performs a wide range of configuration
activities that can include the following:
• Configuring system devices and installed options
• Enabling and disabling system features
• Displaying system information
• Selecting the primary boot controller
• Configuring memory options
• Language selection
For more information on RBSU, see the HP ROM-Based Setup Utility User Guide on the Documentation CD or
the HP website (http://www.hp.com/support/smartstart/documentation).
Using RBSU
To use RBSU, use the following keys:
• To access RBSU, press the F9 key during power-up when prompted.
• To navigate the menu system, use the arrow keys.
• To make selections, press the Enter key.
• To access Help for a highlighted configuration option, press the F1 key.
IMPORTANT: RBSU automatically saves settings when you press the Enter key. The utility does
not prompt you for confirmation of settings before you exit the utility. To change a selected setting,
you must select a different setting and press the Enter key.
Default configuration settings are applied to the server at one of the following times:
• Upon the first system power-up
• After defaults have been restored
Default configuration settings are sufficient for proper typical server operation, but configuration settings can
be modified using RBSU. The system will prompt you for access to RBSU with each power-up.
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Component identification 6
- Front panel LEDs and buttons 7
- System board components 8
- DIMM slot locations 9
- System maintenance switch 9
- HP c-Class Blade SUV Cable 10
- Operations 11
- Remove the server blade 12
- Remove the access panel 13
- Install the access panel 13
- Remove the air baffle 13
- Install the air baffle 13
- Overview 15
- Connecting to the network 17
- Installing a server blade 18
- Completing the configuration 19
- Introduction 20
- Hard drive option 20
- Processor option 22
- Memory options 27
- DIMM identification 28
- Memory configurations 29
- Installing a DIMM 35
- Mezzanine card option 36
- Cabling 47
- USB devices 48
- USB diskette 50
- Item Description 50
- Network-based PXE deployment 52
- Deployment methods 54
- CD-ROM deployment 55
- Diskette image deployment 56
- Configuration tools 57
- HP ROM-Based Setup Utility 58
- Auto-configuration process 59
- Boot options 59
- BIOS Serial Console 59
- Array Configuration Utility 60
- Management tools 62
- Erase Utility 63
- Redundant ROM support 63
- Diagnostic tools 64
- Integrated Management Log 65
- Keeping the system current 66
- Care Pack 67
- Troubleshooting 68
- Symbols on equipment 69
- Warnings 69
- Symptom information 70
- Troubleshooting 71 71
- Loose connections 72
- Service notifications 72
- Server health LEDs 72
- Troubleshooting flowcharts 72
- Start diagnosis flowchart 73
- General diagnosis flowchart 74
- Symptoms: 76
- POST problems flowchart 78
- OS boot problems flowchart 80
- • Corrupted OS 81
- • Redundancy failure 83
- (http://www.hp.com/support) 84
- Troubleshooting 85 85
- Battery replacement 86
- FCC rating label 87
- Class A equipment 87
- Class B equipment 87
- Modifications 88
- • EMC Directive 2004/108/EC 89
- Japanese notice 90
- BSMI notice 90
- Korean notice 90
- Chinese notice 91
- Laser compliance 91
- Battery replacement notice 91
- Electrostatic discharge 93
- Specifications 94
- Technical support 95
- Technical support 96 96
- Customer Self Repair 97
- Technical support 98 98
- Reparo feito pelo cliente 99
- Technical support 100 100
- Technical support 101 101
- Technical support 102 102
- Acronyms and abbreviations 103
- Index 105 105
- Index 106 106
- Index 107 107
- Index 108 108
Related products and manuals for Computer hardware Hp ProLiant BL280c G6 Server-Blade
(125 pages)© 2020, manymanuals.com. All rights reserved. | 2.757 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals