Hp Compaq Integrated Smart Array Controller User Manual Page 37
- Page / 147
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Option ROM Configuration for Arrays Utility 4-3
Compaq Confidential – Need to Know Required
Writer: Cynthia Dresden Project: Compaq Integrated Smart Array Controller User Guide Comments:
Part Number: 153236-001 File Name: e-ch4 Option ROM Configuration for Arrays Utility.doc Last Saved On: 9/1/99 2:13 PM
Create Logical Drive Screen
The Create Logical Drive screen allows you to select the new configuration.
This screen appears when no logical drives are configured. The number of
available physical drives is shown in the menu box.
Option ROM Configuration for Arrays, version x.x
Copyright 1999, COMPAQ Computer Corporation
Integrated Smart Array Controller
Detected Physical Drives
Please select the logical drive configuration
Press the arrow keys to select an item
Press <F10> to accept the selection and continue
Press <Esc> to cancel and return to the previous screen
Figure 4-2. Create Logical Drive screen
IMPORTANT: If the logical drive configuration selection you need is not shown on the
Create Logical Drive screen, you must run the Array Configuration Utility (ACU) for your
operating system as described in Chapter 6.
NOTE: The logical drive configuration choices shown on your Create Logical Drive screen
reflect the actual drives available on your system.
[ ] 12.9GB RAID 5 drive, parity, fault tolerant, no online spare
[X] 8.6GB RAID 5 drive, parity, fault tolerant, with online spare
[ ] 8.6GB RAID 1 drive, mirrored, fault tolerant, no online spare
[ ] 4.3GB RAID 1 drive, mirrored, fault tolerant, with online spare
[ ] 17.2GB RAID 0 drive, no fault tolerance
SCSI Port 2: ID 00, COMPAQ AB00911790 4.3GB Drive
SCSI Port 2: ID 01, COMPAQ AB00911790 4.3GB Drive
SCSI Port 2: ID 02, COMPAQ AB00911790 4.3GB Drive
SCSI Port 2: ID 03, COMPAQ AB00411792 4.3GB Drive
- User Guide 1
- Part Number 153236-001 1
- Compaq Computer Corporation 1
- Contents 3
- Chapter 2 4
- Chapter 3 4
- Chapter 4 4
- Chapter 5 4
- Chapter 6 5
- Appendix A 6
- Appendix B 6
- Appendix C 7
- About This Guide 9
- Symbols in Text 10
- Symbols on Equipment 10
- Rack Stability 11
- Getting Help 12
- Compaq Website 13
- Compaq Authorized Reseller 13
- Controller Features 15
- Controller Interface 16
- Drive Array Technology 17
- Fault Tolerance 18
- Drive Movement 18
- Read-Cache Memory 18
- Wide Ultra2 SCSI Technology 19
- Configuration Utilities 20
- Controller 23
- External Cabling 25
- External Cables 26
- Configuring the Controller 28
- Updating Firmware 29
- ROMPaq Diskettes 30
- Running System ROMPaq 31
- Running Options ROMPaq 33
- Option ROM Configuration 35
- Initial Start Screen 36
- Create Logical Drive Screen 37
- Confirmation Screen 38
- Before Installing Drivers 42
- Materials Needed 42
- Operating Systems 43
- (PAS) Diskettes 44
- C:\DIR\SPXXXX.exe 45
- A:\README 45
- Novell NetWare 46
- Installation Procedure 47
- Microsoft Windows NT 4.0 49
- README.BAT 50
- A:\README.BAT 50
- A:\SETUP 51
- Microsoft Windows 2000 54
- SmartStart 55
- The Internet 55
- Installing the Driver 56
- SCO OpenServer 5 57
- Compaq SCO OpenServer 5 58
- SCO OpenServer 5 (Non-Compaq) 58
- SCO UnixWare 2.1 or Later 59
- IBM OS/2 60
- Controller Ordering 62
- Partitioning 63
- Controller Drive 63
- Command Line Switches 64
- BASEDEV=CPQARRAY.ADD /A:2 /I 65
- Banyan VINES 7.0 or Later 66
- Before You Begin 70
- Running the Compaq 70
- Array Configuration Utility 70
- ACU Online 71
- Microsoft Windows NT 71
- Configuration Wizards 72
- Online Help 72
- Main Configuration Screen 73
- Menu Bar 74
- Controller Selection Frame 75
- More Information Bar 76
- Drive View Buttons 76
- Controller Buttons 76
- Array Buttons 77
- Logical Drive Button 77
- Controller Settings Screen 78
- Create Drive Array Screen 79
- Array Accelerator Frame 81
- Stripe Size 81
- Table 6-1 82
- Stripe Size Fault Tolerance 82
- Autoconfiguration 82
- Custom Configuration 83
- Drive Rebuild 85
- Priority Settings 86
- Accelerator Ratio 86
- Expand an Array 86
- Add or Configure Spare Drives 86
- ■ Interim Recovery 87
- ■ Ready for Recovery 87
- Handling Disk Drive Failures 88
- Configuration Procedures 90
- Grouping Physical Drives 92
- Figure 6-20. Example Array B 93
- Expanding Capacity 97
- Capacity Extension 100
- Extending Logical Drives 101
- Online Migration 102
- Online Stripe Size Migration 103
- Errors and Warnings 104
- Electrostatic Discharge 105
- Grounding Methods 106
- Understanding Drive Arrays 107
- Drive Arrays 110
- Logical Drives 110
- Drive Array Benefits 111
- Table B-1 112
- RAID Level Characteristics 112
- P = Parity 113
- Drive Mirroring and Striping 114
- (RAID 1 and RAID 0+1) 114
- No Fault Tolerance (RAID 0) 115
- Online Spares 115
- Performance Enhancement 116
- Optimized Request Management 117
- Bus Master Data Transfers 118
- Adding Storage Capacity 119
- ■ Hot-plug hard drives 121
- Data Reliability 122
- Dynamic Sector Repairing 123
- Drive Parameter Tracking 123
- Drive Failure Alert Features 123
- Interim Data Recovery 123
- Automatic Data Recovery 124
- Hot-Plug Drives 124
- Recovering from Drive Failure 126
- Recognizing a Drive Failure 127
- Replacing a Failed Drive 129
- Compromised Fault Tolerance 131
- Questions and Answers 133
Related products and manuals for Computer Accessories Hp Compaq Integrated Smart Array Controller
Computer Accessories Hp XP Racks User Manual
(158 pages)
(158 pages)
Computer Accessories Hp XP Racks User Manual
(153 pages)
(153 pages)
© 2020, manymanuals.com. All rights reserved. | 1.499 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals