Hp 2600 User Manual download pdf (Page 314)

100

101

File Transfers

Transferring Switch Configurations

 For a Unix TFTP server, the file permissions for the switch software file

do not allow the file to be copied.

 Another console session (through either a direct connection to a terminal

device or through Telnet) was already running when you started the

session in which the download was attempted.

Note If an error occurs in which normal switch operation cannot be restored, the

switch automatically reboots itself. In this case, an appropriate message is

displayed after the switch reboots.

Transferring Switch Configurations

Transfer Features

Feature Default Menu CLI Web

use TFTP to copy from a remote

host to a config file

use TFTP to copy a config file to a

remote host

use Xmodem to copy a

configuration from a serially

connected host to a config file

Use Xmodem to copy a config file

to a serially connected host

n/a — below —

n/a — page A-19 —

n/a — page A-20 —

Using the CLI commands described in this section, you can copy switch

configurations to and from a switch.

TFTP: Copying a Configuration from a Remote Host.

Syntax: copy tftp < startup-config | running-config>< ip-address > < remote-file >

This command copies a configuration from a remote host to the startup-config

file in the switch. (Refer to Chapter 6, “Switch Memory and Configuration” for

information on the startup-config file.)

For example, to download a configuration file named sw4100 in the configs

directory on drive "d" in a remote host having an IP address of 10.28.227.105:

HPswitch# copy tftp startup-config 10.28.227.105

d:\configs\sw4100

A-18

1 2 ... 309 310 311 312 313 314 315 316 317 318 319 ... 417 418

Comments to this Manuals

No comments

Hp 2600 User Manual Page 314

Comments to this Manuals

Related products and manuals for Computer Accessories Hp 2600