HP 80st User's Guide download pdf (Page 7)

1-3

First Steps

Upgrades, Conversions, and Kit Contents

These instructions explain how to install upgrade/conversion kits for the following

product configurations.

•

Adding two drives to a two-drive 5.2-Gbyte-drive jukebox and enabling 32

additional cartridge slots.

•

Converting a two-drive 2.6-Gbyte-drive jukebox to a two-drive 5.2-Gbyte-drive

jukebox and adding 32 additional cartridge slots (not activated).

•

Converting a four-drive, 64-slot 2.6-Gbyte-drive jukebox to a four-drive, 64-slot

5.2-Gbyte-drive jukebox.

•

Converting two- drive, 76-slot 2.6-Gbyte-drive jukebox to a two-drive, 76-slot

5.2-Gbyte-drive jukebox.

NOTE A “J,” “K,” and “L,” suffix on a kit number denotes the sales channel in which this

jukebox is distributed.

A “J” suffix on a kit number means that the kit is used on reseller channel products.

“K” and “L” suffixes means that the kit is used on OEM jukeboxes.

What is an Upgrade?

Upgrades add drives of the same technology to a jukebox. With this jukebox, it also

means enabling 32 additional cartridge slots that are installed in the factory but not

used until four drives are installed. After the upgrade the jukebox can access 64

slots.

NOTE One two-drive model of this 5.2 Gbyte drive jukebox uses 76 slots. That model

cannot be upgraded.

For an upgrade, use the following steps:

Step 1 - Check the upgrade kit contents and that you have the necessary equipment,

tools, and firmware.

Step 2 - Go to Chapter 2, “Upgrading Drives and Capacity”

Step 3 - Go to Chapter 4, “Downloading Firmware”

Step 4 - Go to Chapter 5 - “Verifying Proper Jukebox Operation, Labeling, and

Cleanup.”

1 2 3 4 5 6 7 8 9 10 11 12 ... 57 58

No comments

HP 80st User's Guide Page 7