HP c8000 Workstation Installation Manual download pdf

HP Mid-Weight Slide Kit

(5069-6371)

Installation Instructions

About this device

The HP Mid-Weight Slide Kit (5069-6371) enables you to install HP

2U, 3U, 4U, and 5U servers into HP round-hole, square-hole,

threaded-hole, and early HP racks.

Kit contents

If any of the following items are missing or damaged, contact your

HP authorized reseller. The following hardware pieces are included

in this kit.

Quantity Description Picture

1 Cable management arm (J1539-63003)

2 Mid-weight inner slides (J1539-63001)

2 Mid-weight outer slide assemblies (J1539-

63002)

2 Hook-and-loop straps (1400-2030)

1 Mid-weight slide-mounting alignment tool

(5185-6098)

Hardware kit contents

Quantity Description Picture

2 M5 x 30-mm screw (0515-2992)

1 M5 x 10-mm screw (5021-2991)

2 M5 x 16-mm screw (0515-3019)

4 M4 x 8-mm screw (0515-2478)

2 M5 barrel nut (5065-7210)

1 Tie-down bracket (5069-6357)

Optional hardware kit contents (J1539-63004)

The optional hardware kit is required to install the mid-weight slide

kit into early HP racks.

Quantity Description Picture

4 M5 x 16-mm screw (0515-3019)

2 M6 flathead screw (5185-6036)

2 Front bracket (5184-2312)

Required tools

The following tools are required for installation:

• T-25 Torx driver

• Phillips screwdriver

• Flathead screwdriver

• M10 socket

• Mid-weight slide-mounting alignment tool (included with this kit)

Rack warning

WARNING: To reduce the risk of personal injury or

damage to the equipment, be sure that:

• The leveling feet are extended to the floor.

• The full weight of the rack rests on the leveling feet.

• The stabilizing feet are attached to the rack if it is a

single-rack installation.

• The racks are coupled together in multiple-rack

installations.

• Only one component is extended at a time. A rack

may become unstable if more than one component is

extended for any reason.

Mid-weight slides overview

Perform one of the following:

• Install the mid-weight slides in a rack ("Installing the mid-weight

slides in a rack" on page 1).

-or-

• Ship a rack with an integrated server ("Shipping a rack with an

integrated server" on page 3).

Installing the mid-weight slides in a rack

1. Install the mid-weight inner slides ("Installing the mid-weight

inner slides" on page 1).

2. Mark your rack columns using the mid-weight slide-mounting

alignment tool ("Marking your rack columns using the mid-

weight slide-mounting alignment tool" on page 1).

3. Follow the appropriate installation procedure for your

rack type:

o Installing the mid-weight slides in round-hole or square-hole

racks (on page 2)

o Installing the mid-weight slides in threaded-hole racks

(on page 2)

o Installing the mid-weight slides in early HP racks

o (on page 2)

4. (Optional) Adjust the mid-weight outer slide assemblies

("(Optional) Adjusting the mid-weight outer slide assemblies"

on page 3).

Installing the mid-weight inner slides

1. Align the mid-weight inner slide holes with the tabs on

the server.

2. Slide the mid-weight inner slides toward the rear of the server

until they lock into place.

Marking your rack columns using the mid-weight

slide-mounting alignment tool

1. Using the height of the mid-weight inner slides, mark both sides

of the mid-weight slide-mounting alignment tool.

2. Using the marked mid-weight slide-mounting alignment tool,

mark the front and rear columns of the rack.

Item Description

1 Mark for HP 5U servers

2 Mark for HP 4U servers

3 Mark for HP 2U and HP 3U servers

The information contained herein is subject to change without notice. The

only warranties for HP products and services are set forth in the express

warranty statements accompanying such products and services. Nothing

herein should be construed as constituting an additional warranty. HP shall

not be liable for technical or editorial errors or omissions contained herein.

Part Number 416755-003

March 2008 (Third Edition)

1 2 3 4 5 6 7 8

HP Mid-Weight Slide Kit 1
(5069-6371) 1

Summary of Contents

Page 1 - (5069-6371)

HP Mid-Weight Slide Kit (5069-6371) Installation Instructions About this device The HP Mid-Weight Slide Kit (5069-6371) enables you to install

Page 2

HP Mid-Weight Slide Kit (5069-6371) Installation Instructions About this device The HP Mid-Weight Slide Kit (5069-6371) enables you to install

Page 3

Installing the mid-weight slides in round-hole or square-hole racks NOTE: If the rear slide brackets must adjust to shallower or deeper third-pa

Page 4

Installing the mid-weight slides in round-hole or square-hole racks NOTE: If the rear slide brackets must adjust to shallower or deeper third-pa

Page 5

4. Extending the cable management arm, slide the server forward. 5. Route the cables through the cable management arm. 6. Install hook-and-loop s

Page 6

4. Extending the cable management arm, slide the server forward. 5. Route the cables through the cable management arm. 6. Install hook-and-loop s

Page 7

3. Using the marked mid-weight slide-mounting alignment tool, mark the front and rear columns of the rack. Item Description 1 Mark for HP 5U serve

Page 8

3. Using the marked mid-weight slide-mounting alignment tool, mark the front and rear columns of the rack. Item Description 1 Mark for HP 5U serve

Comments to this Manuals

No comments

HP c8000 Workstation Installation Manual

Browse online or download Installation Manual for Car kits HP c8000 Workstation. HP c8000 Workstation Setup and Install User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Car kits HP c8000 Workstation