HP ProDesk 600 G3 Base Model Microtower PC User Manual download pdf (Page 13)

Removing the computer access panel

To access internal components, you must remove the access panel:

1. Remove/disengage any security devices that prohibit opening the computer.

2. Remove all removable media, such as compact discs or USB ash drives, from the computer.

3. Turn o the computer properly through the operating system, then turn o any external devices.

4. Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as

the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to

the internal components of the computer.

5. Slide the access panel lock (1), slide the panel toward the rear of the computer (2), and then lift it o the

computer (3).

Removing the computer access panel 7

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 48 49

No comments

HP ProDesk 600 G3 Base Model Microtower PC User Manual Page 13