HP EliteDesk 705 35W G4 Desktop Mini PC User Manual download pdf (Page 40)

Memory modules

The computer comes with at least one small outline, dual in-line memory module (SODIMM). To achieve

maximum memory support, you can populate the system board with up to 32 GB of memory.

Memory module specications

For proper system operation, the memory modules must meet the following qualications:

Component Specication

Memory modules 1.2 volt DDR4-SDRAM memory modules

Compliance unbuered non-ECC PC4-19200 DDR4-2400 MHz-compliant

Pins industry-standard 260-pin containing the mandatory Joint Electronic Device Engineering

Council (JEDEC) specication

Support support CAS latency 17 DDR4 2400 MHz (17-17-17 timing)

Slots 2

Maximum memory 32

Supported 2 Gbit, 4 Gbit, 8 Gbit, and 16 Gbit non-ECC memory technologies single-sided and double-

sided memory modules

Note The system will not operate properly if you install unsupported memory modules.

Memory modules constructed with x8 and x16 DDR devices are supported; memory

modules constructed with x4 SDRAM are not supported.

HP oers upgrade memory for this computer and advises that the consumer purchase it to avoid

compatibility issues with unsupported third-party memory.

Removing memory modules

For a list of available memory modules, see Computer major components on page 4.

There are two memory module slots on the system board, with one slot per channel. The slots are labeled

DIMM1 and DIMM3. The DIMM1 slot operates in memory channel B. The DIMM3 slot operates in memory

channel A.

32 Chapter 4 Removal and replacement procedures

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 116 117

No comments

HP EliteDesk 705 35W G4 Desktop Mini PC User Manual Page 40