Hp ProLiant DL160 G5 Storage-Server User Manual Page 135

  • Download
  • Add to my manuals
  • Print
  • Page
    / 174
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 134
2. On the left side of the window, select Add/Remove Windows Components. The Windows
Components Wizard appears.
3. Select Other Network File and Print Services and click the Details button. The Other Network File
and Print Services window is displayed.
4. Uncheck the Microsoft Services for NFS subcomponent.
5. Click OK, then Next, followed by Finish.
NOTE:
Uninstalling Microsoft Services for NFS removes two primary services:
Server for NFS
User Name Mapping
After setting up clustering, should you choose to reinstall Microsoft NFS, follow these steps:
1. Select Start > Settings > Control Panel > Add or Remove Programs. The Add or Remove Programs
window is displayed.
2. On the left side of the window, select Add/Remove Windows Components. The Windows
Components Wizard appears.
3. Select Other Network File and Print Services and click the Details button. The Other Network File
and Print Services window is displayed.
4. Check the Microsoft Services for NFS subcomponent.
5. Click OK, then Next, followed by Finish.
6. After NFS is installed, you can view the details of the Microsoft Services for NFS subcomponent
to see which of its subcomponents were installed. The subcomponents listed below are preinstalled
at the factory. Verify that the Server for NFS and User Name Mapping services have been
reinstalled.
Microsoft Services for NFS Administration
RPC External Data Representation
RPC Port Mapper
Server for NFS
Server for NFS Authentication
User Name Mapping
Checklists for cluster server installation
These checklists assist in preparing for installation. Step-by-step instructions begin after the checklists.
Network requirements
A unique NetBIOS cluster name
For each node deployed in the cluster the following static IP addresses are required:
One for the network adapters on the private network
One for the network adapters on the public network
One for the virtual server itself
A single static cluster IP address is required for the entire cluster.
HP ProLiant Storage Server 135
Page view 134
1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 173 174

Comments to this Manuals

No comments