Hp Unified Extensible Firmware Interface User Manual download pdf (Page 10)

Figure 5 Boot Options — UEFI Boot Order screen

Booting to the UEFI Shell

You can select the UEFI Shell for a one-time boot override whenever necessary. This option does

not modify your predefined boot order settings.

To boot to the UEFI Shell:

1. Reboot the server.

2. During the reboot, press F11 Boot Menu in the HP ProLiant POST screen. In a few minutes,

the One-Time Boot menu screen appears.

3. Select Embedded UEFI Shell, and press Enter.

4. Press any key to acknowledge that you are physically present. This steps ensure that certain

features, such as disabling Secure Boot or managing the Secure Boot certificates using

third-party UEFI tools are not restricted.

5. If an admin password is set, enter it at the prompt. For information on setting the admin

password, see the HP UEFI System Utilities User Guide.

The Shell> prompt appears.

6. Enter commands as explained in “UEFI Shell command reference” (page 13).

7. Enter the exit command to exit the Shell.

10 Introduction

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 78 79

No comments

Hp Unified Extensible Firmware Interface User Manual Page 10