HP ProLiant DL560 User's Guide download pdf (Page 7)

Component identification 7

Item Description Status

NIC status LED Solid green = Link to network

Flashing green (1 Hz/cycle per sec) = Network active

Off = No network activity

Health LED Solid green = Normal

Flashing amber = System degraded

Flashing red (1 Hz/cycle per sec) = System critical

Fast-flashing red (4 Hz/cycles per sec) = Power fault*

Power On/Standby button

and system power LED

Solid green = System on

Flashing green (1 Hz/cycle per sec) = Performing power on sequence

Solid amber = System in standby

Off = No power present**

UID button/LED Solid blue = Activated

Flashing blue (1 Hz/cycle per sec) = Remote management or

firmware upgrade in progress

Off = Deactivated

* To identify components in a degraded or critical state, see the Systems Insight Display LEDs, check iLO/BIOS logs, and

reference the server troubleshooting guide.

** Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has

occurred, or the power button cable is disconnected.

Systems Insight Display LEDs

The HP Systems Insight Display LEDs represent the system board layout. The display enables diagnosis with

the access panel installed.

Item Description Status

Over temp Off = Normal

Solid amber = High system temperature

detected

1 2 3 4 5 6 7 8 9 10 11 12 ... 101 102

No comments

HP ProLiant DL560 User's Guide Page 7