HP 705 Specifications download pdf (Page 90)

Removing a 3.5-inch device

CAUTION: All removable media should be taken out of a drive before removing the drive from the

computer.

1. Prepare the computer for disassembly (Preparation for disassembly on page 66).

2. Remove the access panel (

Access panel on page 67).

3. Remove the front bezel (

Front bezel on page 67).

4. Rotate the drive cage to its upright position.

5. Disconnect the drive cables from the rear of the drive, or, if you are removing a media card

reader, disconnect the USB cable from the system board as indicated in the following illustration.

80 Chapter 6 Removal and replacement procedures – small form factor (SFF) chassis

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 205 206

No comments

HP 705 Specifications Page 90