HP StorageWorks MSA1000 Installation Guide download pdf (Page 79)

Configuration Procedures - for OpenVMS Environments

79MSA1000 Installation Guide

9. After reinstalling the left controller, the following message is displayed:

CLONE FIRMWARE? ‘<‘ =NO, ‘>’=YES

Press the > button on the left controller display to begin the cloning process.

Note: If you take no action, the firmware clone starts automatically.

The message ROM CLONING STARTED is displayed, indicating that the firmware

on the left controller is being cloned. Cloning takes approximately one

minute.

After the firmware clone is complete, the left controller displays the message

ROM CLONING DONE, followed by ARRAY CONTROLLER RESTARTING.

The controller will restart within 30 seconds. The left controller displays

COMPAQ MSA1000 STARTUP COMPLETE when the startup routine is complete.

10. Use the

show this_controller or show other_controller commands to

verify the firmware download.

The MSA1000 firmware has now been upgraded with firmware that supports

Tru64 UNIX® and TruCluster Server.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 111 112

No comments

HP StorageWorks MSA1000 Installation Guide Page 79