Hp Designjet 4500 Printer series User Manual download pdf (Page 128)

5. Press the spindle lever (2) down and remove the roll from the printer, pulling out the right-hand

end first. Do not insert your fingers into the spindle supports during the removal process.

Roll detached from spindle

If the end of the roll is visible but no longer attached to the spindle:

1. If you have already selected Paper unload at the front panel, press the Cancel key to cancel

that procedure.

2. Lift the paper load lever. If the front panel displays a warning about the lever, ignore it.

3. Pull out the paper from the front of the printer.

4. Press the spindle lever down and remove the empty spindle from the printer, pulling out the

right-hand end first. Do not insert your fingers into the spindle supports during the removal

process.

5. Lower the paper load lever.

6. If the front panel is displaying a warning message, press the Select key to clear it.

No paper visible

If the end of the roll has entirely disappeared into the printer:

1. Press the Form Feed and Cut key on the front panel, and the remaining paper will be ejected.

2. Press the spindle lever down and remove the empty spindle from the printer, pulling out the

right-hand end first. Do not insert your fingers into the spindle supports during the removal

process.

Load a single sheet [4000]

NOTE This topic applies to the HP Designjet 4000 Printer series only.

Any loaded roll must be unloaded before loading a sheet. See Unload a roll from the printer [4000].

114 Chapter 6 How do I... (paper topics) ENWW

How do I... (paper topics)

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 359 360

No comments

Hp Designjet 4500 Printer series User Manual Page 128