HP NF758LA Point of Sale User's Guide download pdf (Page 32)

13. To install a new expansion card in the riser card, align the bracket on the expansion card with the

open slot on the rear of the chassis and press the card straight into the expansion socket.

Figure 2-21 Installing a PCI Expansion Card

NOTE: When installing an expansion card, press firmly on the card so that the whole connector

seats properly in the expansion card slot.

14. Close the slot cover retainer.

Figure 2-22 Closing the Riser Card Slot Cover Retainer

NOTE: The slot cover retainer is secured in place by the computer cover.

15. Connect external cables to the installed card, if needed. Connect internal cables to the system

board, if needed.

16. Return the power supply to the down position until it locks.

17. Replace the computer cover.

18. If the computer was on a stand, replace the stand.

19. Reconnect the power cord and any external devices, then turn on the computer.

26 Chapter 2 Hardware Upgrades ENWW

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 67 68

No comments

HP NF758LA Point of Sale User's Guide Page 32