Hp FIBRE CHANNEL TO SCSI ROUTER M8201R User Manual download pdf (Page 41)

Hardware Replacement Procedures

M8201R Fibre Channel to SCSI Router Installation and User’s Guide—529971-005

6-3

Fibre Channel to SCSI Router Replacement

7. Place the old Fibre Channel to SCSI router aside.

8. Install the new Fibre Channel to SCSI router. Refer to section 3 Installing the Fibre

Channel to SCSI Router for the NonStop NS-Series Server when installing a new

Fibre Channel to SCSI router.

9. Enter in the following SCF command:

SCF> ALTER TAPE TAPE1, WWN 100000E00200F00

The WWN (Worldwide Name) is on the rear of the Fibre Channel to SCSI Router

as shown in Figure 6-3 on page 6-3.

10. Power on the tape drive. See Figure 6-1 on page 6-1 for the power switch location.

Then wait for it to perform its power-on-self-test (POST).

11. Start the tape drive in SCF by entering in the following command:

SCF> START TAPE $TAPE1

Figure 6-3. Rear View of the Fibre Channel Router

WWNN: 100000E00200F000

WWPN: 100000E00C00F000

ENET MAC ID: 00:E0:02:00:00:XY

WWN Name

WWP Name

Ethernet MAC ID

(Physical Address)

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 60 61

No comments

Hp FIBRE CHANNEL TO SCSI ROUTER M8201R User Manual Page 41