Hp Spectre x2 User Manual download pdf (Page 40)

Card reader board

NOTE: The card reader board spare part kit does not include the card reader board cable. The card reader

board cable is available using spare part number 830334-001.

Description Spare part number

Card reader board (includes memory card reader slot and power button actuator):

For use only on slate models with WLAN and WWAN capability (includes SIM slot) 830343-001

For use only on slate models with only WLAN capability 830342-001

Before removing the card reader board, follow these steps:

1. Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then

shut it down through the operating system.

2. Disconnect the power from the slate by unplugging the power cord from the slate.

3. Disconnect all external devices from the slate.

4. Remove the display panel assembly (see Display panel assembly on page 20).

Remove the card reader board:

1. Release the ZIF connector (1) to which the card reader board cable is attached, and then disconnect

the card reader board cable from the system board.

2. Remove the Phillips PM2.0×2.2 broad head screw (2) that secures the card reader board to

the bottom cover.

3. Remove the card reader board (3).

Reverse this procedure to install the card reader board.

30 Chapter 5 Removal and replacement procedures

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 70 71

No comments

Hp Spectre x2 User Manual Page 40