HP rp2400 Technical Information download pdf (Page 8)

HP rp2400 Series of Servers - Basic Cable Connections

Front Panel Controls and indicators

Chapter 1

Front Panel Controls and indicators

The following section describes the controls and LED indicators at the front of the rp24xx Server as shown in

the following graphic:

Figure 1-2 Controls and LED Indicators

1. (Green) RUN LED - When lit, indicates that the system is powered-up.

2. (Amber) Attention (ATTN) LED - When lit, indicates that a condition exists that requires operator

attention and assistance from HP Support.

3. (Red) Fault LED - When lit, indicates that a condition exists that requires immediate operator action.

4. (Amber) Remote LED - When lit, indicates that the remote ports are active.

5. (Green) Power LED - When lit, indicates that the system has DC power enabled.

NOTE For technical support please call your local support hotline or contact HP at

http://www.hp.com/support.

Server External Connections

External devices are interfaced with the server by means of specific connectors located on the rear bulkhead.

Exterior connections to the server include ports for:

• Small Computer System Interface (SCSI) devices

•System Console

• Local Area Network (LAN) Console

•LANs

•Power Cord

ccrr018

Run Attn.

Fault Remote Power

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

HP rp2400 Technical Information Page 8