HP NetServer LXr 8500 User's Guide download pdf (Page 14)

Chapter 1 Server Administration Using HP TopTools

NOTE Ensure you label any cables attached to the PCI board (disk

controller, NIC, etc.), to identify it later when connecting the

cable to the new or replacement PCI board.

9. Release the PCI hold-down latch to remove the board from the PCI slot.

a. Press the center of the PCI hold-down latch (should hear a click).

See Figure 8.

b. Pull the latch to half open (allows the board to clear the latch).

See Figure 8.

A. Push here

to release

(should click).

B. Pull latch

to half open from rear.

Figure 8. Releasing the PCI Board

NOTE The HP NetServer is shown with its top cover removed for

clarity. Only the PCI Access Panel should be removed for this

procedure. See Step 3.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 46 47

No comments

HP NetServer LXr 8500 User's Guide Page 14