HP Pro/10 User Manual download pdf (Page 12)

Windows for Workgroups Version 3.11

8 After windows loads, open the “NETWORK” program group, and double-

click the “Network Setup.”

9 Select the “Networks” button in the “Network Setup” dialog box.

10 Click on the “Install Microsoft Windows Network:” option, and click “OK.”

11 Click the “Drivers” button from the “Network Setup” dialog box, and click

on “Add Adapter.”

12 Click “OK” to accept the default choice of “Unlisted or Updated Network

Adapter.”

13 Type the path “A:\WFW” in the “Install Driver” dialog box, and then insert

the Intel EtherExpress drivers disk into the floppy drive, and click “OK”.

(If you have an HP preloaded HDD, set path to

“C:\LANDRV\INTEL10\WFW”)

14 Select “Intel EtherExpress [TM] PRO/10 LAN Adapter” in the “Unlisted or

Updated Network Adapter” dialog box, and click “OK.”

15 Click “OK” in the “Intel EtherExpress [TM] PRO/10 LAN Adapter” dialog

box to confirm the interrupt, Base I/O, the Transceiver Type, Link Speed,

Power Management, AllFramesCRT, DynamicCRTMax, Dynamic-

CRTIncrement ,and the DynamicCRTInterval settings.

16 Make sure that the “Intel EtherExpress [TM] PRO/10 LAN Adapter

[NDIS2/NDIS3]“ is selected in “Network Drivers.”

17 Accept the list of Protocols listed below and click on the “CLOSE.”

button.

Intel EtherExpress PRO/10 LAN Adapter (NDIS2/NDIS3)

Microsoft NetBEUI

IPX/SPX Compatible Transport with NetBIOS

(If you do not have the required information, contact your network

administrator)

18 At the “Network Setup” dialog box, click on “OK”.

19 Specify your User Name, Workgroup, and Computer Name in “Microsoft

Windows Network Names” dialog box, and click on “OK.”

20 Finish the network card installation by clicking on “OK” in the “Network

Setup” message.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 34 35

No comments

HP Pro/10 User Manual Page 12