HP NC150T User Manual download pdf (Page 10)

Installing the Adapter

Installing the Adapter in a Server

Refer to the HP ProLiant server documentation for additional information on how to safely

install a PCI card in the server.

Figure 2-1: Installing the adapter in a server

CAUTION: If the server is not PCI Hot Plug compliant, power it down and unplug the power

cord from the power outlet before removing the server cover. Failure to do so may damage

the adapter or server.

1. Power down the server.

2. Unplug the power cord from the power outlet.

WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal

system components to cool before touching them.

3. Allow the internal system components to cool before touching them.

4. Remove the server cover and cover bracket from a PCI slot.

5. Firmly seat the adapter in the PCI slot and secure the adapter bracket.

6. Replace the server cover and plug in the power cord.

2-2 HP NC150T PCI 4-port Gigabit Combo Switch Adapter User Guide

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

No comments

HP NC150T User Manual Page 10