HP StoreEasy 3830 Gateway Storage/S-Buy User Manual Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 144
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 13
The type of access you select is determined by whether or not the network has a Dynamic Host
Configuration Protocol (DHCP) server. If the network has a DHCP server, you can install the storage
system through the direct attachment or remote management methods. If your network does not have
a DHCP server, you must access the storage system through the direct attachment method.
The direct attachment method requires a display, keyboard, and mouse. These components are not
provided with the storage system.
IMPORTANT:
Only the direct attach and remote management access methods can be used to install the storage
system. After the storage system installation process is complete and the system's IP address has been
assigned, you can then additionally use the remote browser and remote desktop methods to access
the storage system.
Locate the serial number, Certificate of Authenticity, and End
User License Agreement
For technical support purposes, locate the storage system's serial number, Certificate of Authenticity
(COA), and End User License Agreement (EULA). Record the serial number and COA product key
and make a print copy of the EULA as needed.
The storage system's serial number is located in several places:
Top of the storage system or blade
Back of the storage system
Inside the storage system shipping box
Outside of the storage system shipping box
The storage system's Certificate of Authenticity (COA) card is located inside the storage system shipping
box. There is also a COA sticker with product key affixed to the top of the storage system or blade.
The storage system's printed End User License Agreement (EULA) is located in the media kit that is
shipped with the storage system. There is also an electronic copy of the EULA installed with the storage
system at %SystemDrive%\Windows\System32\license.rtf.
Install the storage system hardware
If your storage system is fully racked and cabled, move ahead to Connect to the storage system.
For X3400 and X3800 G2 storage systems, install the rail kit and insert and secure the storage system
into the rack by following the HP Rack Rail Kit Installation Instructions.
ForX3800sb G2 G2 storage systems, install the server blade by following the procedures documented
in the provided HP StorageWorks X3800sb G2 Network Storage Gateway Blade Quick Start Guide.
Connect to the storage system
Use either the direct connect or remote management method to connect to the storage system.
Installing and configuring the storage system14
Page view 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 143 144

Comments to this Manuals

No comments