HP 002-01A User's Guide download pdf (Page 13)

Upgrading and Servicing Guide 9

c Lower the door onto the hinges.

2 To install an inlay:

a If necessary, place the door on its hinges as described in step 1.

b Close the door.

c On the outside of the door:

a To vertically position the inlay with the door, align the top row of snap

studs (F) on the inlay with the top row of holes (G) in the door.

b Lower the inlay onto the door just to the left of the slots (E), while maintaining

the vertical alignment.

c Slide the inlay toward the front of the chassis, inserting the three tabs (D) on

the inlay into the slots (E) in the door.

CAUTION: To avoid damaging the door, check that both of the door hinges are

properly seated onto the hinge pins.

CAUTION: To avoid damaging the inlay, do not hold or pull out the inlay more

than 2.54 cm (1 inch) away from the door.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 57 58

No comments

HP 002-01A User's Guide Page 13