HP 8753ES User Manual download pdf (Page 11)

Test port input characteristics (continued)

External source mode

(CW time sweep only)

Frequency range 300 kHz to 6 GHz

R-channel input requirements (typical)

Power level

0 to -25 dBm

Spectral purity

Maximum

<-30 dBc

spurious input

Residual FM

<20 kHz

Typical settling 500 ms (automatic)

time

50 ms (manual)

Frequency readout 0.1% (automatic)

accuracy

Input frequency accuracy requirement

Manual -0.5 to 5 MHz

Accuracy (see magnitude and phase

characteristics)

Magnitude characteristics

Dynamic accuracy

(10 Hz IF BW)

Display resolution 0.001 dB/division

Marker resolution

0.001 dB

Trace noise

(+5 dBm at test-port, ratio measurement, 3 kHz BW)

300 kHz to 3 GHz < 0.006 dB rms

3 GHz to 6 GHz < 0.010 dB rms

Reference level

Range

±500 dB

Resolution 0.001 dB

Stability

30 kHz to 3 GHz 0.02 dB/ ˚C

3 GHz to 6 GHz 0.04 dB/ ˚C

Phase characteristics

Dynamic accuracy (10 Hz IF BW)

Range ±180˚

Display resolution 0.01˚/ division

Marker resolution

0.01˚

Trace noise

(+5 dBm at test-port, ratio measurement, 3 kHz BW)

300 kHz to 3 GHz

< 0.038˚ rms

3 GHz to 6 GHz

< 0.070˚ rms

Reference level

Range

-180˚ to +180˚

Resolution 0.01˚

Stability

30 kHz to 3 GHz 0.05˚/ ˚C

3 GHz to 6 GHz 0.20˚/

˚C

Polar characteristics

Range

10 x 10

-12

to 1000 units

full scale

Reference ±500 units

1. See the HP 8753ES descriptions and options for a functional description. Measurement accuracy is dependent

on the stability of the input signal.

2. Typical performance.

3. Marker resolution for magnitude; phase and delay is dependent upon measured value. Resolution is limited to

five digits.

(300 kHz to 3GHz)

(3 to 6GHz)

(300 kHz to 3GHz)

(3 to 6GHz)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comments to this Manuals

No comments

HP 8753ES User Manual Page 11

Comments to this Manuals

Related products and manuals for Measuring, testing & control HP 8753ES