HP HP LaserJet Printer 8000 Service Manual Page 508

  • Download
  • Add to my manuals
  • Print
  • Page
    / 730
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 507
480 Chapter 7 Troubleshooting C4085-91087
Table 7-35. Faulty Registration
Possible Cause Recommended Action
1. Paper tray is overloaded. If the tray
is overloaded, the Pickup Rollers may
not pick correctly.
Reload proper amount of paper
squarely in the tray. Review paper
loading with the customer.
2. Paper guide on the paper tray is
incorrectly adjusted. If the guide is
pushing too tightly against the paper,
it may be delayed in being pulled into
the printer. If the guide is too loose, it
may cause image skewing.
Make sure that the paper guide is
adjusted for the correct paper size
and is locked into position.
3. Paper does not meet
specifications. The surface of the
paper may be too smooth for the
Pickup and Feed Rollers to correctly
feed paper into the printer.
Try a different paper lot (see
HP
LaserJet Printer Family Paper
Specifications Guide
).
4. Drive gears are worn or broken. If
any gear within the drive train or
paper path becomes excessively
worn or dirty, erratic paper movement
can result.
Replace the defective gear or Main
Drive assembly. See “Main Gear
Assembly” on page 202 for
instructions.
5. Worn Pickup or Registration
Rollers. Paper is not being picked up
consistently.
Inspect all paper path rollers, looking
for wear, cracks, or glazing. Replace
the worn rollers.
Table 7-36. Image Skew
Possible Cause Recommended Action
1. Paper is loaded incorrectly. If the
paper is not installed flush into the
paper tray, a skewing problem will
result.
Remove paper from the tray, and
install paper correctly. Position the
paper guide correctly for the paper
size being used.
2. Paper size adjustment levers are
missing or installed incorrectly.
Verify and correct.
Page view 507
1 2 ... 503 504 505 506 507 508 509 510 511 512 513 ... 729 730

Comments to this Manuals

No comments