HP C9K75UT User Manual download pdf (Page 43)

Solid-state drive

Description Spare part number

128-GB mSATA solid-state drive (SSD) 689953-001

256-GB mSATA solid-state drive (SSD) 689955-001

Before removing the SSD, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the base enclosure (see

Base enclosure on page 29).

5. Disconnect the battery cable (see

Battery on page 31).

Remove the solid-state drive:

1. Remove the 2 Phillips PM 2.0x2.0 screws (1) securing the solid–state drive to the top cover. The

drive tilts upwards.

2. Remove the solid–state drive (2).

Reverse these procedures to reassemble and install the hard drive.

Component replacement procedures 35

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 89 90

No comments

HP C9K75UT User Manual Page 43