HP Switch KVM User Manual download pdf (Page 26)

HP CONFIDENTIAL

File Name: 339674-1.doc Last Saved On: 8/14/03 3:54 PM

26 HP KVM Server Console Switch User Guide

Performing a Velcro-Mount Installation

1. Determine the location for the Expansion Module.

2. Remove the protective strip from one side of the Velcro and attach that side

to the Expansion Module.

3. Remove the protective strip from the other side of the Velcro and attach the

Expansion Module to the rack frame.

Configuring the Expansion Module

1. Mount the Expansion Module into the rack.

2. Locate up to nine UTP CAT5 cables.

3. Connect a UTP CAT5 cable to the server connection port ("Components" on

page 17) on the HP KVM Server Console Switch.

4. Connect the other end of that same UTP CAT5 cable to the IN port on the

Expansion Module.

5. Connect one end of another UTP CAT5 cable to the OUT port on the

Expansion Module.

6. Connect the other end of the second UTP CAT5 cable to the Interface

Adapter ("Installing the Interface Adapter" on page 21).

7. Repeat steps 5 and 6 to connect any other servers to this system.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 94 95

No comments

HP Switch KVM User Manual Page 26