Hp PL4245N 42 inch HD-ready Plasma Television User Manual download pdf (Page 23)

Setup 17

3 Connect the red and white audio cables from your video source to the Audio In on the back of the

TV. Be careful to keep the audio right and left channel connections correct for stereo sound.

4 Turn on the TV and the S-video source. Insert media into the S-video source and play it.

5 Select S-video as the input source for the main TV picture (so you see the image playing from the

S-video source) by using the front panel buttons or press the SV button on the TV remote control.

Refer to “Selecting the input source” on page 21.

6 To set up the TV remote control to operate the S-video source, refer to “Programming the remote

control for component control” on page 33.

Refer to your S-video source owner’s manual for information about your equipment’s video output

requirements.

Connecting a Component (YPbPr or YCbCr) Source

Use YPbPr cables to connect your component video source or other equipment to the component input

connectors (YPbPr or YCbCr) on the TV.

To make these connections:

1 Turn off the TV and the component input source equipment.

2 Connect one end of the red, green, and blue component cables to the YPbPr or YCbCr video output

connector on the component video source, and connect the other ends to the YPbPr or YCbCr

inputs on the back of the TV.

3 Connect the red and white audio cables from your video source to the Audio In on the back of the

TV. Be careful to keep the audio right and left channel connections correct for stereo sound.

4 Turn on the TV and the component video source. Insert media into the component video source and

play it.

5 Select YPbPr1, YPbPr2, or YCbCr as the input source for the main TV picture (so you see the image

playing from the component video source) by using the front panel buttons or press the YPbPr or

YCbCr button on the TV remote control. Refer to “Selecting the input source” on page 21.

6 To set up the TV remote control to operate the component video source, refer to “Programming the

remote control for component control” on page 33.

Refer to your component video source owner’s manual for information about your equipment’s video

output requirements.

Connecting the HP Media Center PC

You can connect the TV to an HP Media Center PC (HP MCPC) and use the special buttons on the

remote control associated with the HP MCPC.

Refer to your HP MCPC documentation to connect the TV to the HP MCPC as:

• A monitor using either a VGA cable or a DVI-D cable.

• A TV using the TV input source connectors for video (composite) inputs, S-video, or component

video inputs; see the appropriate procedure in this document.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 59 60

No comments

Hp PL4245N 42 inch HD-ready Plasma Television User Manual Page 23