HP 240A User Manual Page 6
- Page / 93
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Overview 6
Overview
Before you begin
For more information about site requirements, specifications, power, management requirements, and
supported facility connections, see the HP Performance Optimized Datacenter 240e NA Site Preparation
and Requirements Guide.
The location of various components or subsystems in the HP POD 240e NA might vary from this
documentation. For final placement specifications, see the data sheets that are included in the operations
and maintenance manual.
Operator safety
The HP POD 240e NA is not habitable or suitable for human occupancy. The HP POD 240e NA is Listed as
a Product that provides service access areas for periodic maintenance and service. These areas must be
controlled and available for use only by owner-authorized personnel and qualified personnel who are
trained in the maintenance and service of the HP POD 240e NA components.
WARNING: To avoid the risk of personal injury or loss of life, all personnel must comply with PPE
requirements when opening or working inside areas of the HP POD 240e NA that are marked as
hazardous voltage, per NFPA 70E in accordance with NEC (NA) and IEC (EMEA and APJ).
WARNING: To avoid the risk of personal injury, hearing protection must be worn at all times
when working inside the HP POD 240e NA.
WARNING: To avoid the risk of personal injury or damage to the equipment, do not insert
anything inside the electrical busways, except for the approved HP busway drop boxes.
Before completing the installation of the HP POD 240e NA, the customer, or a designated agent, is
responsible for completing any Environmental Health and Safety evaluation of the HP POD 240e NA or any
attached structural component purchased through HP. The customer, or their designated agent, must also
complete an arc flash assessment and breaker coordination study of the HP POD 240e NA and the
associated electrical supply system for operation and maintenance. The individual or organization that
completes the arc flash assessment must also create and provide all required labeling for all electrical panels
on the HP POD 240e NA.
Component safety
CAUTION: If the HP POD 240e NA is shut down for an extended period of time, such as during
routine maintenance, use desiccant units or materials to eliminate condensation within the HP
POD 240e NA. Condensation causes damage to IT equipment and HP POD 240e NA controls.
- North America (Adiabatic) 1
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Overview 6
- Fire detection 7
- Preventative maintenance 7
- Environmental considerations 7
- Component identification 8
- Component identification 11 11
- Life safety systems 19
- EPO modes 21
- EPO accidental activation 21
- Fire detection system 22
- Fire alarm panel 23
- Fire alarm indicators 23
- Emergency egress 24
- Site electrical system 25
- Power safety 25
- Capacities 26
- Power feeders 27
- Electrical panel labels 27
- Panel schedules 29
- Wire color code 29
- Electrical busways 30
- Drop boxes 32
- Rack power 32
- Lighting 33
- Environmental control system 34
- Components of the ECS 35
- Satellite control boxes 35
- Top view shown 37
- Configuring the ECS 38
- • Add the PLC to a network 40
- Locating the ECS IP address 41
- Password protected 42
- Navigating the ECS interface 42
- Top screen 43
- AD detail screen 45
- Charts screen 47
- Psychrometric chart 48
- Readings chart 48
- Electrical Cabinets screen 49
- Controls Network screen 50
- Alarms screen 51
- Stats screen 52
- Configure 54
- HMI settings 55
- Managing the ECS system 56
- Setting the offset alarm 57
- Setting the IP address 57
- Forcing an alarm 57
- Adiabatic units 60
- AHU system 61
- AHU theory of operation 62
- AHU system 63 63
- AHU system 64 64
- Static pressure control 65
- Networking 66
- Connection portals 66
- Demarcation box 67
- Fire box 68
- Adding a phone 68
- Standard components 70
- Optional components 71
- Specifications 72
- Environmental specifications 73
- Maintenance 74
- Item Component Description 75
- Supply header gravity drain 76
- Supply header blowdown 78
- Power up procedure 79
- Standard power up procedure 81
- ECS and EPO 82
- Cold weather operation 82
- Power down procedure 83
- Contacting HP 84
- Safety and NEC compliance 85
- Warranty information 86
- Glossary 87
- Glossary 88 88
- Glossary 89 89
- Documentation feedback 90
- Index 91 91
- Index 92 92
- Index 93 93
Related products and manuals for Fire protection HP 240A
Fire protection HP 20cp User Manual
(81 pages)
(81 pages)
Fire protection HP 40cp User Manual
(63 pages)
(63 pages)
Fire protection HP 40C User Manual
(84 pages)
(84 pages)
© 2020, manymanuals.com. All rights reserved. | 0.554 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals