HP NetServer NetRAID-4M User Manual download pdf (Page 17)

HP NetRAID-4M Cluster Services Installation Guide Hardware, Drivers and Utilities

9. If there is no digital signature found, click Yes to continue.

10. After the driver files for the controller, including the HP NetRAID-4M Management

Device driver, have been copied from the floppy disk, click Finish.

NOTE The NetRAID-4M management device communicates controller events to the

Windows 2000 Advanced Server system event log (SOURCE = HPNMGT).

11. Remove the HP NetRAID-4M driver diskette from the floppy drive.

HP 10/100BaseT LAN Adapter (D5013B) NIC Driver

12. From the Windows 2000 desktop, right-click the My Network Places icon and select

Properties.

13. From the toolbar, click on Advanced and select Advanced Settings.

14. In the Connections panel verify or set the bindings to be in the following order and then

click OK.

Local Area Connection (Public)

Local Area Connection x (Heartbeat)

[Remote Access connections]

15. Double-click on the Local Area Connection x (x being the number of the newly added

D5013B NIC) icon, click the Configure button and then click on the Advanced tab.

NOTE The icon will display a red X because the other node server is powered off.

16. From the Property list select the Link Speed & Duplex option and then from the Value

list select the 100 Mbps/Full Duplex option; click OK to continue.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 41 42

No comments

HP NetServer NetRAID-4M User Manual Page 17