HP Compaq dx2450 Specifications download pdf (Page 48)

8. To install a new expansion card, hold the card just above the expansion socket on the system

board then move the card toward the rear of the chassis so that the bottom of the bracket on the

card slides into the small slot on the chassis. Press the card straight down into the expansion socket

on the system board.

NOTE: When installing an expansion card, press firmly on the card so that the whole connector

seats properly in the expansion card slot.

9. Replace the slot cover lock and secure it in place with the screw that was previously removed.

10. Connect external cables to the installed card, if needed. Connect internal cables to the system

board, if needed.

11. Reconfigure the computer, if necessary. Refer to the Computer Setup (F10) Utility Guide for

instructions on using Computer Setup.

42 Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 106 107

No comments

HP Compaq dx2450 Specifications Page 48