HP VS80 User Manual download pdf (Page 12)

12 Installing the Autoloader Chapter 1

Choosing a Location

Choose a location that meets the following criteria (see Technical

Specifications on page 71 for more information on specifications):

Table 1 Location Criteria

Standalone

requirements

Select a location that is flat, sturdy, level, and close to a

host server. Do not place the autoloader on the floor or

other carpeted surfaces.

CAUTION: Do not place the autoloader on its side or

upside down or stack items that weigh more than 15 KG

on top of the autoloader.

Rack

requirements

Standard 19-inch rack with 2U of clearance.

Room

temperature

10-35º C (50-95º F)

Humidity 20-80% RH (non condensing)

Power source ■ AC power voltage: 100-127 VAC; 200-240 VAC

■ Line frequency: 50-60 Hz

NOTE:

Locate the AC outlet near the autoloader. The AC

power cord is the product’s main AC disconnect device

and must be easily accessible at all times.

Weight 10 kg (22 lbs)

Air quality Minimal sources of particulate contamination. Avoid

areas near frequently used doors and walkways, stacks

of supplies that collect dust, printers, and smoke-filled

rooms.

CAUTION: Excessive dust and debris can damage tapes

and tape drives.

Clearance Back Minimum of 15 cm (6 inches)

Front Minimum of 31 cm (12 inches)

Sides Minimum of 5 cm (2 inches)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 89 90

No comments

HP VS80 User Manual Page 12