English 43
3 Troubleshooting Your PC
If Your PC Has a Software Problem
If Your PC Has a Software Problem
If You Have Forgotten Your Password
❒ If you forget the User Password, but not the Administrator password,
carry out the following procedure:
1 Switch off the PC.
2 Restart the PC. If the keyboard is locked, enter the administrator
password.
3 Wait for
F2=Setup to be displayed.
4 Press to start Setup.
5 Enter the Administrator Password to access the Security/User
Password menu.
6 Move to the User Password field and set a new User Password. This
will replace the old password which you had forgotten.
7 Press to save the new Password and exit Setup.
❒ If you forget both the User Password and the Administrator
Password:
1 Switch off the PC.
2 Remove the computer’s cover.
3 Set switch 7 on the system board switch block to CLOSED.
4 Replace the PC’s cover.
5 Switch on the PC and allow it to complete its startup routine.
The message “Passwords have been cleared, power-off
your PC and set switch 7 to open position before
restarting” will be displayed.
6 Switch off the computer and remove the PC’s cover.
7 Reset switch 7 to OPEN.
8 Replace the computer’s cover.
9 Switch on the PC and allow it to complete its startup routine.
10After the Power-On Self-Test has completed, press when
prompted to use Setup.
11 Set new User and System Administrator Passwords.
12 Press to save the new passwords and exit Setup.
Comments to this Manuals