HP ProDesk 400 G4 Base Model Desktop Mini PC User Manual download pdf (Page 25)

Front bezel

NOTE: It is not necessary to remove the front bezel to access other components.

The front bezel is secured to the top cover by screws.

1. Prepare the computer for disassembly (Preparation for disassembly on page 15).

2. Remove the access panel (Access panel on page 16).

3. Position the top cover upside-down so you can access the inside of the bezel.

4. Remove the two Phillips screws (1) that secure the bezel to the access panel.

5. Simultaneously press the two top tabs (not the four bottom tabs) to disengage the bezel (2).

6. Rotate the top of the bezel downward (3), and then remove it from the access panel (4).

To install the front bezel, reverse the removal procedure.

Front bezel 17

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 112 113

No comments

HP ProDesk 400 G4 Base Model Desktop Mini PC User Manual Page 25