HP EliteDesk 705 G3 Microtower PC User Manual download pdf (Page 9)

Rear panel components

1 PS/2 keyboard connector (purple) 7 Power cord connector

2 DisplayPort monitor connectors 8 PS/2 mouse connector (green)

3 VGA monitor connector 9 Serial port

4 USB 3.1 ports (blue) 10 RJ-45 (network) jack

5 USB 3.1 ports (blue) 11 USB 2.0 ports (black) with keyboard

wakeup function

6 Audio-out jack for powered audio devices (green) 12 Audio-in jack (blue)

NOTE: An optional second serial port and an optional parallel port are available from HP.

If using a USB keyboard, HP recommends connecting the keyboard to one of the USB 2.0 ports with the wakeup feature. The

wakeup feature is also supported on the PS/2 connector if enabled in BIOS F10 Setup.

When a device is plugged into the microphone/headphone jack, a dialog box will pop up asking if you want to use the jack for a

microphone or a headphone. You can recongure the jack at any time by double-clicking the Audio Manager icon in the

Windows taskbar.

When a graphics card is installed in one of the system board slots, the video connectors on the graphics card and/or the

integrated graphics on the system board may be used. The specic graphics card installed and software conguration will

determine the behavior.

The system board graphics can be disabled by changing settings in BIOS F10 Setup.

Rear panel components 3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 46 47

No comments

HP EliteDesk 705 G3 Microtower PC User Manual Page 9