Hp StoreEasy 1000 Storage User Manual Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 132
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
The type of access you select is determined by whether or not the network has a Dynamic Host
Configuration Protocol (DHCP) server. If the network has a DHCP server, you can install the storage
system through the direct attachment or remote management methods. If your network does not have
a DHCP server, you must access the storage system through the direct attachment method.
The direct attachment method requires a display, keyboard, and mouse. These components are not
provided with the storage system.
IMPORTANT:
Only the direct attach and remote management access methods can be used to install the storage
system. After the storage system installation process is complete and the system's IP address has been
assigned, you can then additionally use the remote browser and remote desktop methods to access
the storage system.
Locate the serial number, Certificate of Authenticity, and End
User License Agreement
For technical support purposes, locate the storage system's serial number, Certificate of Authenticity
(COA), and End User License Agreement (EULA). Record the serial number and COA product key
and make a print copy of the EULA as needed.
The storage system's serial number is located in several places:
Top of the storage system or blade
Back of the storage system
Inside the storage system shipping box
Outside of the storage system shipping box
The storage system's Certificate of Authenticity (COA) card is located inside the storage system shipping
box. There is also a COA sticker with product key affixed to the top of the storage system or blade.
The storage system's printed End User License Agreement (EULA) is located in the media kit that is
shipped with the storage system. There is also an electronic copy of the EULA installed with the storage
system at %SystemDrive%\Windows\System32\license.rtf.
Install the storage system hardware
If your storage system is fully racked and cabled, move ahead to Connect to the storage system.
For X1400 G2, X1600 G2, and X1800 G2 storage systems, install the rail kit and insert and secure
the storage system into the rack by following the HP Rack Rail Kit Installation Instructions.
ForX1800sb G2 storage systems, install the server blade and optional storage blade by following
the procedures documented in the provided HP StorageWorks X1800sb G2 Network Storage Blade
Quick Start Guide.
If you ordered the HP Tower to Rack Conversion Tray Universal Kit for the purpose of installing the
X1500 G2 Network Storage System tower model in a rack, use the provided tower-to-rack conversion
kit installation instructions to install the tower hardware into the rack.
Installing and configuring the storage system12
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 131 132

Comments to this Manuals

No comments