HP Paslode 403606-10 User Manual Page 1

POperating and Maintenance ManualPNEUMATIC TOOLS403606-1008/02

T250-F16 Series Finish NailerStep No. 1 – Grasp the nailer firmly with one hand.Step No. 2 – Insert the strip with the point of thefastener facing dow

2000 Series StaplerStep No. 1 – Grasp the stapler firmly with one hand.Depending on the model,either squeeze the latchwith your small finger or press

MAINTENANCEPaslode® tools are built for ease of maintenance. A fewsimple details will assure trouble-free operation and longtool life. Anyone who use

MAINTENANCE - ContinuedDrain air line filter(daily).Keep lubricator filled.Clean filter element-then blowair through filter in directionopposite to no

OPERATOR TROUBLESHOOTING PROBLEM CORRECTIVE ACTIONFasteners will not drive completely into wood.Fasteners penetrate prop

TOOL WARRANTYTOOL WARRANTY AND LIMITATIONSAn Illinois Tool Works Company888 Forest Edge DriveVernon Hills, Illinois 60061P15

PASLODE MODEL NUMBER DESIGNATIONThe model number of each Paslode tool contains information about the tool and the fastenersthat are used with it. The

INTRODUCTIONCongratulations on purchasing a Paslode pnuematic tool. You have made a wise choice.A Paslode tool is a professional quality tool that co

WARNINGFailure to follow any of the above instructions could result in severe personalinjury to tool user and bystanders or cause damage to tool an

5AIR SYSTEMSFor air-powered tools to work their best, the airsupply system must be properly installed andmaintained regularly. A drawing in this sect

AIR SYSTEMS - ContinuedCalculating Compressor SizeUse the air consumption chart in the ToolSchematic for each tool when calculating theoperating requ

TOOL INSTALLATIONYour Paslode tool comes ready for immediate useand can be installed by following these steps:1. SAFETY - All tool operators and thei

Precision Placement Driving Grasp the tool handle firmly and hold the bottom of the workcontacting element firmly against the workpiece until it is

Coil NailersStep No. 1 – Grasp the nailer handle firmly with onehand and with the other hand unlatch the magazinecover clip. Swing the magazine door