Hp SmartStart-Software User Manual download pdf (Page 12)

Deployment options 12

Obtain SYSLINUX 3.5 or higher from The Syslinux Project website

(

http://syslinux.zytor.com/index.php) and download to a Linux workstation.

2. Install the SYSLINUX RPM obtained in step 1.

3. If a directory does not already exist, create one for the USB key mountpoint.

For example, mkdir /usbkey.

4. Insert the USB key, and mount it. The device mountpoint can vary depending on whether other SCSI

drives are also installed on the server. Therefore, the device mountpoint can be sdb1, sdc1, and so

on.

mount /dev/sda1 /usbkey

5. Issue the ./syslinux /usbkey command to have SYSLINUX write out the boot partition to the

USB key. Failure to issue this command might lead to a key that does not boot the Firmware DVD

until the SYSLINUX command is successful.

6. Create a directory to mount the DVD image, for example, mkdir /dvd_mount_point.

7. Insert the Firmware DVD or mount the Firmware DVD ISO through a loopback:

mount /dev/dvdrom /dvd_mount_point or mount -t iso9660 firmware-

<version>.iso /dvd_mount_point -o loop

8. Change the directory to the /usb directory on the DVD:

dvd /dvd_mount_point/usb

9. Execute the usbcreator.sh shell script passing in the DVD mount point and the USB mountpoint to

move the Firmware DVD files to the USB key:

./usbcreator.sh /dvd_mount_point /usbkey

10. If additional components must be added to the USB, copy the components into the /hp/swpackages

(Linux operating systems) or the \hp\swpackages (Windows® operating systems) directory and HP

Smart Update Manager picks them up automatically if the version can support the type of

components added.

NOTE: If you are using a USB drive key with multiple DVD images, navigate to the

appropriate DVD subfolder and relative path seen above to copy components.

11. Unmount the DVD and the USB key. This must match the initial mount point in step 4.

umount /dev/dvdrom

umount /dev/sda1

12. Remove the USB key and DVD.

NOTE: To remove a DVD image from your USB drive key, delete the subfolder containing the

CD image, and edit the syslinux.cfg file at the root of the USB drive key, deleting the section

referencing that subfolder name.

Using a hard drive

1. Copy the contents of the \hp\swpackages directory from the DVD or ISO image to a directory on

the hard drive where HP Smart Update Manager will be executed.

2. Ensure that execute privileges are available in Linux by using the chmod 700 * command. By

default, the files are copied off the DVD in Linux as read-only with no execution privileges.

3. Copy any updated files into the same directory where the files were copied in step 1.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 50 51

No comments

Hp SmartStart-Software User Manual Page 12