HP 11i User Manual download pdf (Page 48)

Conﬁguring gated

Conﬁguration Overview

Chapter 348

NOTE You can also use the command gdc checkconf to parse the

/etc/gated.conf ﬁle for syntax errors. gdc issues a message to

indicate the parsing errors. If there are any errors, the error output

is saved to a ﬁle for further inspection. For more details, type man 1M

gdc at the HP-UX prompt.

6. Set the environment variable GATED to 1 in the ﬁle

/etc/rc.config.d/netconf to invoke gated automatically when

the system is started.

7. To start gated, reboot your system or run the following gated

startup script:

/sbin/init.d/gated start

You can also start gated by executing the following command:

gdc start

The following message appears:

gated started, pid 25579

where

25579 is the process ID (pid) of the gated process.

Examples of gated conﬁguration ﬁles are included in the sections

“Conﬁguring the OSPF Protocol” on page 60 and “Conﬁguring the RIP

Protocol” on page 50. Additionally, they are also included in the

/usr/newconfig/gated/conf directory.

NOTE HP recommends that you specify the IP address in dot notation (for

example, a.b.c.d) for a conﬁguration option such as a router, host, or

interface. Host names with multiple IP addresses associated with them

produce errors.

Converting the Conﬁguration File from 3.0 to 3.5.9

To convert a gated 3.0 conﬁguration ﬁle to the gated 3.5.9 syntax,

complete the following steps:

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 112 113

No comments

HP 11i User Manual Page 48