HP xw25p User Manual download pdf (Page 208)

• Quick MEMBIST Test—Choosing this option causes the system to reboot and run the

preconfigured hardware-based memory test. Upon reboot, Memory Diagnostics displays the

test results. A normal system reboot is required after performing a MEMBIST test.

• User-defined MEMBIST Test—Choosing this option enables a user-defined configuration of the

Quick MEMBIST test. Increasing the MEMBIST test time results in a blank screen for the duration

of the test. Upon test completion and reboot, Memory Diagnostics displays the test results. A

normal system reboot is required after performing a MEMBIST test.

NOTE: To cancel either MEMBIST test, press and hold the Power On/Standby button to

initiate a forced shutdown. Upon reboot, no record of an incomplete test exists.

For all servers other than a Generation 5 server with an Intel processor, the Software Memory Test

automatically runs when Memory Test is selected from the Diagnostic Utility Menu.

CPU Test

The CPU diagnostic test checks the registers and MP capability of each processor. The test first

checks all the 16-bit and 32-bit registers, and then checks all the flags for all processors. If no

errors are found, OK is displayed under the Status column for each processor. If errors are found,

X is displayed under the Status column for each processor with errors.

To run the CPU diagnostic test, select CPU Test from the Diagnostics Utility menu.

208 ROM-based utilities

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 220 221

No comments

HP xw25p User Manual Page 208