Hp 2800 User Manual download pdf (Page 86)

TACACS+ Authentication

Configuring TACACS+ on the Switch

Table 4-1. AAA Authentication Parameters

Name Default Range Function

console n/a n/a Specifies whether the command is configuring authentication for the console port

- or - or Telnet access method for the switch.

telnet

enable

n/a n/a Specifies the privilege level for the access method being configured.

- or -

enable: Manager (read-write) privileges

local local n/a Specifies the primary method of authentication for the access method being

- or - configured.

tacacs local: Use the username/password pair configured locally in the switch for

the privilege level being configured

tacacs: Use a TACACS+ server.

local

- or -

none

none n/a Specifies the secondary (backup) type of authentication being configured.

local: The username/password pair configured locally in the switch for the

privilege level being configured

none: No secondary type of authentication for the specified

method/privilege path. (Available only if the primary method of

authentication for the access being configured is local.)

Note: If you do not specify this parameter in the command line, the switch

automatically assigns the secondary method as follows:

• If the primary method is

tacacs, the only secondary method is local.

• If the primary method is

local, the default secondary method is none.

num-attempts 3 1 - 10 In a given session, specifies how many tries at entering the correct username/

password pair are allowed before access is denied and the session terminated.

As shown in the next table, login and enable access is always available locally

through a direct terminal connection to the switch’s console port. However,

for Telnet access, you can configure TACACS+ to deny access if a TACACS+

server goes down or otherwise becomes unavailable to the switch.

4-12

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 299 300

No comments

Hp 2800 User Manual Page 86