HP Jetdirect 620n Fast Ethernet Print Server Installation Manual download pdf (Page 12)

Installation Procedures 12

ENWW

Remove Power to Printer, Install the

Hardware

Figure 2-1 Remove Power, Install and Connect the Card

1. Turn off the printer and remove the printer’s power cord.

2. Identify an available HP Enhanced I/O (EIO) slot (typically, in

the back of the printer).

Note For printers with multiple EIO slots, you can install

the print server into any EIO slot in the HP

printer.

3. If the slot has a cover plate, remove it.

4. Insert the print server card. Align the card with the guide rails

in the slot.

5. Press the card into the slot until firmly seated and tighten each

retaining screw a little at a time until both screws are secure.

6. Connect the network cable to the card using the RJ-45 connector

port.

7. Turn on the printer.

RJ-45

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 53 54

No comments

HP Jetdirect 620n Fast Ethernet Print Server Installation Manual Page 12