HP 4 FAMILY User Manual download pdf (Page 13)

PCL 5 Technical

Reference Manual

Corrections

This section describes updates to the PCL 5 Printer

Language Technical Reference Manual (5961-0509).

Because this manual will not be updated, any changes to it

are documented in this guide. Some errors have been

identified in the PCL 5 Printer Language Technical

Reference Manual since its printing. Those errors are

identified and corrections are provided on this page.

Chapter 4

PCL Job Control

Commands

Unit of Measure Command

In Figure 4-6 on page 4-18, the two escape sequences at the

top should read “(?&u100D) and (?&u200D)” instead of

“(?&u100B) and (?&u200B).”

Chapter 8

PCL Font Selection

Transparent Print Data Command

The last sentence in the note at the bottom of page 8-33

should read “Refer to the PCL 5 Comparison Guide,

Appendix A, for character codes for the various symbol

sets.” instead of “Refer to Appendix A for character codes for

the various symbol sets.”

Chapter 13

The PCL Print Model

User-Defined Pattern Command

In Figure 13-10 on page 13-19, byte zero should read

Format (20) instead of Format (0)

On page 13-21, Format (Byte 0) should read “0” for a 300

DPI user-defined pattern header and “20” for a

resolution-specified user-defined pattern header.

Feature Set 1-5

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 251 252

No comments

HP 4 FAMILY User Manual Page 13