HP XM600 User Manual download pdf (Page 39)

Installing and Replacing Hardware Parts in Your PC Workstation

System Board Switches

HP Kayak XM600 PC Workstation

There are ten system board switches used for configuration, numbered

from 1 to 10. Of these a certain number are reserved and should not be

modified, otherwise it could lead to a system failure.

Switch Default Position To Configure:

1-5 OFF Reserved 1-5. Do Not change Default Settings

6 ON Enables keyboard power-on.

OFF disables this option.

7 OFF Enables normal modes.

ON enables the BIOS recovery mode at next boot.

8 OFF Retains CMOS memory.

ON clears CMOS memory at next boot.

9 OFF Enables User and System Administrator passwords.

ON clears the passwords at next boot.

10 ON Selects the chassis type.

ON = minitower

Chapter2.fm Page 39 Wednesday, December 8, 1999 6:13 PM

1 2 ... 34 35 36 37 38 39 40 41

No comments

HP XM600 User Manual Page 39