HP C5200 User Manual

Basics GuideseriesHP Photosmart C5200 All-in-One

• Adjust the paper-width guide in the input tray to fit snugly against all paper. Make surethe paper-width guide does not bend the paper in the input

4. Lower the CD/DVD access door to access the CD/DVD tray.The CD/DVD access door is located just below the control panel. When in its loweredposition,

1 xD-Picture Card2 Memory Stick, Memory Stick Pro, Memory Stick Select, Memory Stick Magic Gate, MemoryStick Duo or Duo Pro (adapter optional), or Mem

9. (Optional) If you want to check and/or modify any of your print settings, press tohighlight Settings and press OK.10. To print the photo(s), use

To make a copy from the control panel1. Make sure you have paper loaded in the input tray.2. Load your original print side down on the right front cor

If you are replacing the black, photo, or gray photo print cartridge, remove the printcartridge from the slot on the right.1 Print cartridge slot for

7. Hold the print cartridge with the HP logo on top, and insert the new print cartridge intothe empty cartridge slot. Make sure you push the print car

10. The HP All-in-One prints a test page, aligns the print head, and calibrates the printer.Recycle or discard the page.A success or failure message a

3. Dry the backing with a dry, soft, lint-free cloth.CAUTION: Do not use paper-based wipes, as these might scratch the backing.4. If further cleaning

2 Troubleshooting and supportThis chapter contains troubleshooting information for the HP All-in-One. Specific information isprovided for installation

Hewlett-Packard Company noticesThe information contained in this document is subject to change without notice.All rights reserved. Reproduction, adapt

Solution• Make sure the power cord is firmly connected to both the HP All-in-One and the poweradapter. Plug the power cord into a power outlet, surge

computer and the other into the back of the HP All-in-One. You can connect to any USB port onthe back of your computer.For more information on install

• Check other printers or scanners. You might need to disconnect older products from yourcomputer.• Try connecting the USB cable to another USB port o

Solution: Push the CD/DVD holder forward into the CD/DVD tray until the lines on the holderline up to the white lines on the tray. The end of the hold

The HP All-in-One does not detect a CD/DVD on the holderCause: You inserted the CD/DVD holder into the CD/DVD tray without loading a CD/DVD ontothe ho

The design is not centered on my discCause: Your design settings might not be correct.Solution: Change the software settings to center and size your d

• Do not open the print cartridge door unless necessary. This exposes the print cartridges to air,which reduces the life of the print cartridges.NOTE:

3 Technical informationThe technical specifications and international regulatory information for the HP All-in-One areprovided in this section.System

ENERGY STAR is a U.S. registered service mark of the U.S. EPA. As an ENERGY STAR partner,HP has determined that this product meets ENERGY STAR guideli

WarrantyWarranty 27Technical information

Contents1 HP All-in-One overviewThe HP All-in-One at a glance...

Chapter 328 Technical informationTechnical information

1 HP All-in-One overviewUse the HP All-in-One to quickly and easily accomplish tasks such as making a copy,scanning documents, or printing photos from

Label Description10 CD/DVD access door11 Print cartridge door12 Glass13 Lid14 Rear door15 Power connection*16 Rear USB port* Use only with the power a

Label Name and Description6 Print Photos: Depending on whether you access your photos from the View, Print, or Createmenu, the Print Photos button wil

Find more informationA variety of resources, both printed and onscreen, provide information about setting upand using the HP All-in-One.• Setup GuideT

To load full-size paper1. Raise the output tray to load paper into the main input tray.2. Slide the paper-width guide to its outermost position.3. Tap

5. Slide the paper-width guide inward until it stops at the edge of the paper.Do not overload the main input tray; make sure the stack of paper fits w