HP DeskJet 700 User's Guide download pdf (Page 155)

Full menu mode

Default: 7586,

HP-GL/2

Device setup

Lang

7-7

Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen

This is the cyan on page 7-7 (seq: 153)

This is the black on page 7-7 (seq: 153)

Changing the Graphics Language Setting for a

Different Application

Your software application communicates with the plotter by a graphics language.

The plotter supports HP industry standard CAD language

HP-GL/2 (7856)

HP-GL (7586B)

HP RTL

The plotter’s default setting is designed to work successfully with most

applications, and is called 7586, HP-GL/2. However, it’s possible that with some

older or less common applications, you may need to change this setting to

HP-GL/2, as explained in the table below.

To Change the Graphics Language Setting

Graphics

Language

Comments

7586, HP-GL/2 This should work successfully for most software applications.

With this graphics language setting another parameter is

available: Terminator. Try changing this setting from Normal

(the default) to Special:

 if you are using an obsolete HP 7586 (pen plotter) driver,

and your plots are incomplete.

HP-GL/2 Try this setting:

 if you have experienced plot position problems.

 if you have experienced timing problems.

However, if you choose this setting, you don’t have access to

the Terminator option.

Reconfiguring Your Plotter

Changing the Graphics Language Setting for a Different Application

RECONFIG.

1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 221 222

No comments

HP DeskJet 700 User's Guide Page 155